Electronic Products

These are dc motors without brush and commutator combination and the commutation is achieved by electronic switching. These motors offer various advantages over conventional dc motors viz. Maintenance & trouble free operation, compact size, light weight, higher efficiencies, long life, low cost etc.

We are backed with technical expertise of professionals from usa, india and china having manufacturing setup in mumbai, india and use highly specialized raw material from various parts of the world.

DC tachogenerators give you accurate dc voltage output proportional to speed of its mover. They are widely used in applications for feedback and display purposes.

specifications:

• current: up to 200 ma
• speeds: up to 10000 rpm
• voltage: 4v to 200 v / 1000 rpm

• standard options (extra) :

• temperature compensation
• terminal box / connector
• foot mounting
• extended shaft

These fractional HP permanent magnet DC motors use permanent (magnetic) field excitation.

Range:

• Torque: 1 KGCM up to 50 KGCM
• Speed: 1000 up to 5000 rpm
• Input Power: Up to 1000 W
• Voltage: 12V to 220 V DC

• Standard Features :

• Strontium ferrite magnets used
• Totally enclosed type construction
• Prelubricated sealed imported bearings on both the ends of shaft
• Dynamically balanced Rotors
• Compact and light weight
• Steel body protected against corrosion.
• F- Class insulation standard
• Connection through flying Leads/Terminal Box

These are single phase (capacitor start type) and three phase FHP AC motors. We also offer a range of geared motors.

• Output: 0. 25 rpm to 1440 / 2880 rpm
• Voltage: 110v / 220 v ac (single phase) 220 v / 415 v ac (three phase)

Standard Features :

• Compact
• Closed type construction
• Balanced armature
• Instantaneous reversal at any moment
• Continuous duty.
• Sealed prelubricated bearings at both ends of shaft

Standard Options (extra) :

• Additional fins on body / fan
• Fail safe brake.
• Extended shaft
• Terminal box / connector

The generator are manufactured primarily for applications like wind application, other low voltage and battery operated applications.

We do have standard models off the shelf available which are used by customers. We will be able to share this information on hearing of your requirement from you.

We now look forward to hear from you and hope to be of service to you. The undersigned will be able to discuss with you details of the said product if required in your plant along with your technical experts.

In india where agriculture is the base of the economy, till date many of the area where lands is very fertile but due to the unavailability of the Electric supply Irrigation is almost impossible.

To overcome this problem of the farmer we are introducing our solar water pumping system at very affordable cost with high reliability.

Special Features of  Surface DC Pump:-

• Brushless DC (BLDC) Motor.
• Higher Efficiency
• Higher Life Cycle than any AC & PMDC Pump.
• High Durable and Reliable

Note:  Actual Head and Discharge will require for the particular pump selection. 

Mechanical data:

• Rotational speed < 3000 rpm
• Torque - 10 gmcm
• Shaft loading - 10 n radial
• Weight - 200 gms
• Cover - aluminium, powder coated
• Shaft - stainless steel

Electric data :

• Supply voltage - 5 v, 10-30 v dc
• Loading current - 30 ma
• Outputs - push pull / open collector
• Switching frequency - 50 khz
• Sensor - optical contactless
• Transmitter - infrared led
• Receiver - photo transistor
• Cable - 1 meter (std) shielded multicore with connector

Standard Features :

• Aluminium alloy or Stainless Steel, Brass, Nylon material.
• Inbuilt flange Clamping or set screw clamping.
• Angular Offset upto 5 degrees.
• Parallel offset upto 0.2mm.
• No Backlash.
• Constant Velocity Transmission .
• Import substitution offered.
• Torsionally stiff
• Compact, Lightweight, Reliable.
• One piece Construction.